I haven’t had a chance to contact you after we met on the flight from Dublin to Oslo last month. It was an outstanding conversation we had – language, history, politics from all sorts of perspectives – so it would be a shame not to continue it. Flight go quicker!

Anyway, do drop me an e-mail. I saw a lot on Poland during August and September and I am looking forward to discussing it with you.

Good luck,

C.

I found your post on Ubuntuforums.org regarding activating wireless network on a Amilo M7440G Fujitsu Siemens (http://ubuntuforums.org/showthread.php?t=341453):

sudo modprobe acerhk
sudo su -c “echo 1 > /proc/driver/acerhk/wirelessled

This works and thats great!
Regarding:
”
If it works, you can make it permanent by creating a file /etc/modprobe.d/ipw2200 with the two following lines:

options ipw2200 led=1
install ipw2200 /sbin/modprobe acerhk; sleep 1; echo 1 > /proc/driver/acerhk/wirelessled; /sbin/modprobe –ignore-install ipw2200
”

Iam am new to linux and I dont have the folder “ipw2200″ and I dont know how to make a file to past this code, and I dont know which kind of file I should make. Could you please help me with this one?

Thanks a lot,

Best regards,
Runar from Norway

http://code.blizinski.pl/django-search/ should always point to the right place. If it doesn’t let me know.

Thanks!

I’ve read your Article avout VOIP and HFSC
I’ve got few questions ?

Considering this

tc class add dev $DEV parent 1:1 classid 1:2 hfsc \
rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \
ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \
ul rate ${UPLINK}kbit

rt = realtime curve
ls = linksharing curve

but
m1 = ?
m2 = ?
d = dmax ?

I’ve found this article too
http://linux-ip.net/articles/hfsc.en/

And for example this line is quite diferent !

tc class add dev eth0 parent 1:10 classid 1:12 hfsc sc umax 1500b dmax 30ms rate 100kbit ul rate 1000kbit

Could you light me a bite ?

Regards